ZviZZer

The modern, water-based ZviZZer POLISHING SYSTEM has been designed for a wide range of paint-specific applications.

In combination with the coordinated polishing sponges and their different grinding properties (coarse, medium, fine and ultrafine) you can achieve optimum results on all commercially available paints.

The precise amount and homog...

The modern, water-based ZviZZer POLISHING SYSTEM has been designed for a wide range of paint-specific applications.

In combination with the coordinated polishing sponges and their different grinding properties (coarse, medium, fine and ultrafine) you can achieve optimum results on all commercially available paints.

The precise amount and homogenous size of the novel aluminum oxide abrasive grain in the emulsion makes the difference to traditional polishes. The application impresses with the easy guiding of the polishing machine, the rapid processing and „tearing“ of the polish without any dust formation and the extremely easy removal of the residues on the paint surface.

MADE IN GERMANY“ guarantees the highest quality in production and a constantly controlled quality assurance at the highest level.

More

ZviZZer 

There are 17 products.

„TRAPEZ“ polishing pad (yellow/soft)with inner holeand bachwarded Velcro. To remove:Holograms Application with:FC 2000FINE CUTHOLOGRAM REMOVER

3,22 €
Quick view

„TRAPEZ“ polishing pad (green/ultrasoft)with inner holeand bachwarded Velcro. To remove:Micro Scratches Application with:UC 1000ULTRAFINE CUTSWIRL REMOVER

3,22 €
Quick view

„TRAPEZ“ polishing pad (red/hard)with inner holeand bachwarded Velcro. To remove:Deep Scratches Application with:HC 4000HEAVY CUTSCRATCH REMOVER

3,22 €
Quick view

„TRAPEZ“ polishing pad (orange/medium)with inner holeand bachwarded Velcro. To remove:Fine Scratches Application with:MC 3000MEDIUM CUTONE STEP

3,22 €
Quick view

„Doodle“-WoolpadMerino-Wool black, 15 mmand backwarded Velcro. To remove:Heavy Scratches Application with:HC 4000HEAVY CUTSCRATCH REMOVER

4,61 €
Quick view

„STANDARD“ polishing pad (green/ultrasoft)with rounded working edgeand bachwarded Velcro. To remove:Micro Scratches Application with:UC 1000ULTRAFINE CUTSWIRL REMOVER

4,96 €
Quick view

„STANDARD“ polishing pad (yellow/soft)with rounded working edgeand bachwarded Velcro. To remove:Holograms Application with:FC 2000FINE CUTHOLOGRAM REMOVER

4,96 €
Quick view

„STANDARD“ polishing pad (orange/medium)with rounded working edgeand bachwarded Velcro. To remove:Fine Scratches Application with:MC 3000MEDIUM CUTONE STEP

4,96 €
Quick view

„STANDARD“ polishing pad (red/hard)with rounded working edgeand bachwarded Velcro. To remove:Deep Scratches Application with:HC 4000HEAVY CUTSCRATCH REMOVER

4,96 €
Quick view

„Doodle“-WoolpadVelours white, 5 mmand backwarded Velcro. To remove:Heavy Scratches Application with:HC 4000HEAVY CUTSCRATCH REMOVER

5,21 €
Quick view

PROCESSINGFor processing we recommend the red polishing sponge or lambskin. Apply sufficient amount of HC 4000 to the paint defect / surface or polishing sponge. Distribute evenly over the defect at a low speed (approx. 1.000 rpm), speed to approx. 1.800 rpm. increase and polish off the flaw with light pressure.

11,65 €
Quick view

PROCESSINGFor processing we recommend the yellow polishing sponge. Apply sufficient amount of FC 2000 to the polishing sponge or the paint surface, spread at low speed (about 1.000 rpm) on the defect and at about 1.600 rpm. and moderate pressure.

12,03 €
Quick view

PROCEDUREWe recommend the blue polishing sponge for this procedure. Apply a sufficient quantity of PC5000to the paint defect, surface or polishing pad. If you are using a low speed (c. 1,000 rpm) distribute evenly over the defect area, increase the speed to c. 1,800 rpm and polish using a light pressure to finish off. Application with: Polishpad...

13,21 €
Quick view

PROCESSINGFor processing we recommend the green polishing sponge. Apply sufficient amount of UC 1000 to the polishing sponge or the paint surface, spread at low speed (about 1.000 rpm) on the defect and at about 1.600 rpm. and moderate pressure.

14,02 €
Quick view

PROCESSINGFor processing we recommend the orange polishing sponge or lambskin. Apply sufficient amount of MC 3000 to the polishing sponge or paint surface, spread at low speed (approx. 1.000 rpm) on the defect and apply approx. 1.800 rpm. and moderate pressure.

14,38 €
Quick view

We're very happy to announce that the very first Zvizzer BASIC polishing system class.  During which you will be taught to achieve flawless looking paint in a most effective way using Zvizzer polishing pads & polishes.  The cost of this class is 250,00EUR for which you will receive Zvizzer starter's polishing kit (value of 308,75EUR)with materials that...

206,61 €
Quick view
Showing 1 - 17 of 17 items

Top